TK5220 / TK5320

BATTERY FOR KENWOOD NX200 - 7.4V / 1900 mAh 14.1 Wh / Li-Ion

Part Number: BPKNB47L

Also Fits: NEXEDGE NX200, NX200G, NX200S, NX205G, NX300, NX300G, NX300S, NX305G, TK5220, TK5320. Japanese cells.

BATTERY FOR KENWOOD NX200 - 7.2V / 4800 mAh / 34.6 Wh / Li-Ion

Part Number: BPKNB48LI-48

Also Fits: NEXEDGE NX200G, NX300, NX300G, TK5220, TK5320. Weight: 0.43 lbs. / 195.0 g. Dimensions (LxWxD): 4.15" x 2.29" x 1.05" (105.4 mm x 58.2 mm x 26.7 mm).

ENDURA LOW PROFILE SINGLE UNIT CHARGER FOR KENWOOD NX200 / NX5200 / TK2180

Part Number: EC-KSC32

Also Charges: NX200S, NX210, NX210G, NX300, NX300S, NX410, NX411, NX5300, NX5400, TK3180, TK5210, TK5210G, TK5220, TK5230, TK5310, TK5310G, TK5320, TK5330, TK5410, TK5430, VP5230, VP5330, VP5430, VP6230, VP6330, VP6430. For use with NiCd, NiMH, Li-Ion, and LiPo batteries. Compatible with KNB-41NC / KNB-50NC (IS batteries). Not compatible with KNB-73LCM / KNB-72LC (IS batteries).

ENDURA TWELVE-UNIT CHARGER WITH EXTERNAL POWER SUPPLY

Part Number: EC12M

Includes 6 dual charging pods and power supply with cord for U.S. type wall outlet. Select specific pod(s) and quantity each. See special instructions for ordering EC12M on product detail page. Rapid charges NiCd, NiMH, Li-Ion, or LiPo batteries based on pod selected. Certified to meet California Energy Commission (CEC-400-2011-005) and DoE (10 CFR, Part 430) requirements for energy conversation. Provides cold and hot battery monitoring for batteries with temperature sensing circuitry.

ENDURA DUAL UNIT CHARGER FOR KENWOOD NX200 / NX5200 / TK2180

Part Number: EC2M-KW4A-D

Also Charges: NX200S, NX205G, NX210, NX210G, NX300, NX300S, NX305G, NX410, NX411, NX5300, NX5400, TK3180, TK5210, TK5210G, TK5220, TK5230, TK5310, TK5310G, TK5320, TK5330, TK5410, TK5430, VP5230, VP5330, VP5430, VP6230, VP6330, VP6430. For use with NiCd, NiMH, Li-Ion, and LiPo batteries. Charger accommodates Kenwood KNB-L3 battery with all applicable radios. Compatible with KNB-41NC / KNB-73LCM / KNB-50NC (IS batteries). Not compatible with KNB-72LC / KNB-LS5 / KNB-LS7 (IS battery). Accessories available for in-vehicle installation.

ENDURA RUGGED IN-VEHICLE CHARGER FOR KENWOOD NX200 / NX5000 / VP6000

Part Number: EVC-KW4

Also Charges: NX200S, NX205G, NX210, NX210G, NX300, NX300S, NX305G, NX410, NX411, NX5200, NX5300, NX5400, TK2180, TK3180, TK5210, TK5210G, TK5220, TK5230, TK5310, TK5310G, TK5320, TK5330, TK5410, TK5430, VP5230, VP5330, VP5430, VP6230, VP6330, VP6430. Includes DC power cable, tie-down strap, and USB port for charging mobile phone or tablet. For use with Li-Ion / LiPo and NiMH batteries. Compatible with KNB-LS5, KNB-LS7, KNB-41NC, KNB-72LC, KNB-73LCM / KNB-50NC (IS batteries).

ENDURA CHARGER POD FOR KENWOOD NX200 / NX5200 / TK2180

Part Number: TWP-KW4A

Also Charges: NX200S, NX205G, NX210, NX210G, NX300, NX300S, NX305G, NX410, NX411, NX5300, NX5400, TK3180, TK5210, TK5210G, TK5220, TK5230, TK5310, TK5310G, TK5320, TK5330, TK5410, TK5430, VP5230, VP5330, VP5430, VP6230, VP6330, VP6430, VP8000. For use with NiCd, NiMH, Li-Ion, and LiPo batteries in ECx and TWCx chargers. Pod accommodates Kenwood KNB-L3 battery with all applicable radios. Compatible with KNB-41NC / KNB-50NC / KNB-73LCM (IS batteries). Not compatible with KNB-72LC / KNB-LS5 / KNB-LS7 (IS batteries).

IN-VEHICLE MOUNTING BRACKET FOR ENDURA EC1M / V2 / V3 (HEAVY DUTY)

Part Number: EC1M-MBHD

Designed for mounting charger to vertical or horizontal surface or attaching to an optional bracket with 4-hole AMPS pattern. Includes integrated tie-down strap and fasteners for attaching EC1M-MBHD to vehicle.

MOUNTING BRACKET FOR ENDURA EC6M / EC12M CHARGERS

Part Number: EC6M-MB

Also Fits: EC6M-V2, TWC12M. Designed for mounting charger to a vertical or horizontal surface in an office, shop, or vehicle. Includes integrated tie-down straps, fasteners for attaching EC6M-MB to a wall or floor, and straddle bracket to secure charger to bracket. Dimensions (WxDxH): 20.2" x 6.6" x 3.9".

LOGIC CHARGER DASH MOUNTING BRACKET (KIT)

Part Number: LEVCA-M

Attaches charger to dash or other angled surface. Includes fasteners (4 machine screws with 4 nyloc nuts). Multi-directional with 4-hole AMPS mounting pattern. For use with all EVC and LEVCA chargers.

POWER SUPPLY WITH 3.5 mm DIAMETER CABLE FOR RELM KAA0300P CHARGER

Part Number: TWC1-PS1

Input: 100-240V / 50-60 Hz / 500 mA. Output: 15.0V / 1000 mA. UL listed. Also compatible with Endura EC1, EC1-V2, and TWC1.

POWER SUPPLY FOR ENDURA TWC12M / TWC12MU CHARGER

Part Number: TWC12M-PS

Input: 100 - 240V / 50 - 60 Hz / 2.2A (max). Output: 15.0V / 10.0A. UL listed. Power cord to connect power supply to wall outlet additional. For U.S. type power cord, order TWC6M-PC. For UK type power cord, order TWC6M-PCU.